All posts in Tips & Tricks

RAW Part 2 – Post Processing with Max Foster

Camera Calibration & Saturation – Global Adjustments – Targeted Adjustments (Brush, Gradients, Elliptical) RAW – Part 2 Max Foster Go to RAW Part 1 Camera Calibration & Saturation One of the best […]

Start to Finish Edits: Swept Away

Start to Finish – “Swept Away”  Max Foster   “Swept Away” was taken in the Narrows of Zion National Park during a very high water flow period. One of the […]

RAW Part 1 – Post Processing with Max Foster

Introduction to the Series – Vision and Execution – RAW Workflow Overview – Lens & Distortion Corrections – Presharpening – Noise Reduction RAW – Part 1 Max Foster Introduction to the Series In partnership with Really Right Stuff, I am pleased […]

Photography Tips with Bruce Getty

Photography Tips  Bruce Getty My photography career started when the Nikon D7000 came out. My first setup was the Nikon with a 400mm 2.8 lens, a Induro gimbal head, and […]

Macro Insights: Dark Field Illumination with Focus Stacking

Dark Field Illumination with Focus Stacking Heather Angel The great thing about macro photography is that you have complete control of the lighting within a limited specific area. Translucent plankton […]

General Macro Theory From RRS

General Macro Theory This image consists of five single macro shots of sea anemone stitched in Photoshop to product a single macro pano. Final image size 15,429×5131 pixels. The absorbing […]

Photo by Joe McDonald

Catching Insects In Flight

Catching Insects in Flight With Joe McDonald This summer I gave myself a real challenge. I decided to try to photograph insects in flight, a task that would have been […]

Tip: “Re-positionable” T-Lever Knobs

In order to get adequate torque on the smaller diameter ball sizes we needed to design a locking mechanism that provides enough leverage to securely lock your mid-sized camera equipment […]

Photoshop World Las Vegas 2013

Photoshop World Las Vegas 2013 Be sure to check us out at Photoshop World in Las Vegas from September 4th through the 6th. We will be at Booth 311 for […]